700
STAGE 2 HP
10.4s
STAGE 2 1/4 MILE
2.4s
0-60MPH
STAGE 2 CONTINUATION FIREHAWK
The Hawks Stage 2 Continuation Firehawk takes it up to 700 HP and 650 LB-FT of Torque with a Hawks Motorsports built LS7, tubular suspension components and double adjustable struts. Fitted with the best names in the aftermarket performance industry, this Firehawk puts a whole new spin on Pontiac's famous campaign "Driving Excitement".
BODY
The Hawks Stage 2 Continuation Cars can be built on a variety of different Firebird platforms. Choose between any 1991-1992 Firebird or Trans Am and your preference of body style and retro inspired color options and we take it from there.
No donor car needed.
Already have a nice low-mile donor car you'd like to convert? Reach out to us and we can go over the details.
INTERIOR
Gone are the days of loose steering and rattling panels. The interior of this Firebird has been completely gone through and is well sorted out. Upgrading to the Competition Package replaces both front seats with period correct Recaro's seats, Simpon 5-point harnesses, a Firehawk inspired roll bar and rear seat delete package.
CHASSIS
Starting with the best low-mileage examples available, we update the Stage 2 builds with custom valved double adjustable stuts/shocks and tubular suspension components. Equipped with a modern 10.0:1 steering box, the Continuation Firehawks drive just like a modern Firebird should.
​
WHEELS & BRAKES
EXHAUST
The exhaust is upgraded with our Hawks LS Conversion 2" Stainless Steel Headers, V-banded Y-pipe and our new 3.5 inch "Two Out The Left" stainless exhaust system.
No Firehawk is complete without those iconic Ronal R15 wheels. We equip every Continuation Build with a set of Hawks Redesigned 18x10 inch "R15" wheels with 285/35/18 tires all around.
Inside them you will find standard 1LE 4-wheel disc brakes that can also be upgraded to Baer "6P" calipers and 14 inch 2 piece rotors using our Competition Package.
ENGINE
The 7.0L LS7 has undergone the full Hawks Motorsports treatment receiving CNC ported cylinder heads and a custom ground Camshaft specific to the Continuation Series builds. The engine is fed by a custom dual air filter intake built in house at Hawks and into ported MSD intake manifold and our (proprietary to this series) CNC machined billet aluminum manifold cover resembling the "T-Ram" manifold found on the original SLP Firehawk's.
​
The net result is : a 7000RPM redline, 700 Horsepower and 650 LB/FT of Torque.
TRANSMISSION
Backing that LS7 package is a Tremec T-56 "Magnum-F" 6-speed transmission. Inside, the Magnum-F benefits from the same durable components found in many of today's hardest hitting OEM muscle & sports cars. On top of this serious transmission is our Hawks Billet CNC Short Throw Shifter for a precise and firm shift every time.
​
Rated for 700lb-ft of constant torque
REAR AXLE
At the back of this drivetrain package is a custom 8.8 Rear End assembly that is made in house at Hawks Motorsports. This rear axle housing features an OE ring and pinion, with little to no rear wheel loss, quiet gear operation and is one of the strongest rear end housings on the market.
SPECIFICATIONS
ENGINE:
Type
Hawks Motorsports LS7 w/ Forged Rotating Assembly and Custom Top End Package
Bore & Stroke
4.125" x 4.00"
Displacement
427 cu in
Compression Ratio
11.7:1
HP, SAE Net
700 @ 6,500 RPM
Torque, SAE Net
650 @ 4,800RPM
Induction System
105mm Mamo MSD Intake Manifold w/Billet T-Ram Manifold Cover
Exhaust System
Stainless Works 2 inch primary, 304 SS Headers w/3" Y-Pipe and Hawks Motorsports 3.5" "Two Out The Left" exhaust system
DRIVETRAIN:
Transmission
Tremec T-56 Magnum F 6-Speed
2.66/1.78/1.30/1.00/0.80/0.63
Rear Axle
Hawks Motorsports Custom 8.8 Housing w/ 33 Spline Axles
Axle Ratio
4.10:1
CHASSIS:
Front Suspension
Independent, Custom Valved Viking Double Adjustable Struts and
Specific Coil Springs w/ Tubular K-Member and Lower Control Arms
Rear Suspension
Hawks 8.8 Solid Axle, Viking Double Adjustable Shocks and Specific Coil Springs w/ Tubular Lower Control Arms, Track Bar, Torque Arm and Stabilizer Bar
Steering
Specialty Turn One Steering Box w/10.0:1 Steering Ratio
Brakes
Standard 1LE Spec Power 4-Wheel Discs
Wheels
18x10 in. Hawks "R15" Style Reproduction Wheels
Tires
285/35/18 (Front/Rear)
GENERAL:
Curb Weight
3400 Pounds
Wheelbase
101 Inches
Fuel Capacity
15.4 Gallons
EXTERIOR:
​
Retro Color Options
Dark Green Metallic
Bright White
PERFORMANCE:
Silver Blue Metallic
Medium Gray Metallic
Power to Weight
0 to 60mph
0.206 HP/LBS
2.4 Seconds
Bright Red
Quarter-Mile
10.4 @ 129 MPH
Brilliant Red Metallic
Top Speed
Skidpad
195 MPH
.94g on Full Tread
285/35/R18
Street Tire
Bright Blue Metallic
Black
Dark Aqua Metalic
Jamaica Yellow
